Eng

EIcon series heat-resistant enamel with working temperature ranging from -60°С to +1000°С

The enamel may be used for protective and ornamental painting of furnaces, fireplaces, boilers, chargrills, metal equipment and other surfaces operating under high temperatures.

Heat resistance from -60 to +1000 degrees

Resistance to the impact of aggressive environments

High corrosion resistance

The enamel doesn’t require primer coating

May be applied under conditions of negative temperatures

Anticipated service life up to 25 years

Palette of standard colors

The accuracy of color transferring is limited to the abilities of the RGB color space

Black up to 1000°С / up to 600°С / up to 500°С

Auburn up to 500°С

Blue up to 400°С

Graphite up to 700°С

White up to 400°С

Beige up to 400°С

Silver grey up to 650°С

Dark blue up to 400°С

Orange up to 400°С

Anthracite up to 600°С

Red up to 400°С

The accuracy of color transferring is limited to the abilities of the RGB color space

Grey up to 600°С

Yellow up to 400°С


Green up to 600°С

Brown up to 400°С

Pricing and packaging

  • Aerosol 520 ml

    $1,80
  • Can 0,8 kg

    $3
  • Wholesale distribution starting at

    $3/kg

If you have questions related to the prices or delivery possibilities, please contact us.

Contact us

More than 1 sq. meters of metal structures
have been painted with the enamel

Technical specifications

Parameter Value according to the Technical Specifications (TS) 2312-237-05763441-98
Appearance Once dry, the enamel should form a smooth and homogeneous film
Enamel film color Black, silver, graphite, silver grey, anthracite, grey, green, auburn, white, dark blue, red, yellow, brown, blue, beige, orange
Non-volatile matter content, % 40±5
Relative viscosity at the temperature of (20±0.5)°C according to the VZ-246 viscometer with a 4.0 mm nozzle, s, min not less than 25
Enamel dilution rate until it gets the 15-16 s operation viscosity according to the VZ-246 viscometer with a 4.0 mm nozzle, % 30—80

Film drying type until it gets the 3 degree

- at the temperature of (20±2)°С, hr

- at the temperature of (150±2)°С, min

not more than 2

not more than 30

Enamel film firmness measured by a pendulum instrument:

- TML type, А pendulum, relative units

- М-3 type, relative units

not less than 0,2

not less than 0,4

Coating strength on impact according to the U-1 instrument, cm not less than 40
Coating adhesion, points not more than 1
Coating resistance to temperature impact up to (1000±5)°С, hr not less than 3
Coating resistance to alternating heat and water impact up to (1000±5)°С, cycles not less than 5

Coating resistance to static impact of liquids at (20±2)ºС, hr

– water

– petroleum

– industrial oil

not less than 100

not less than 72

not less than 72

Flash point temperature in a closed cup, °С minus 18–23

Tests

NIIMOSSTROY

According to the tests # 2-07/295 dated June 21, 1999 conducted by NIIMOSSTROY (Moscow) the coating is recommended for external insulation of heat lines and steam lines with the temperature of heat carriers amounting to 475°С (momentarily up to 550°С); it is also recommended for protection of metal chimneys and exhaust pipes and it may be used as a waterproof coating for concrete. Anticipated protective action duration is 20-25 years.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"CNIIMF" CJSC

According to the tests # KhD4-461/25-99 dated July 09, 1999 conducted by the "CNIIMF" CJSC (Closed Joint Stock Company) (Saint-Petersburg) the Elcon organosilicone enamel corresponds to the requirements set for the coatings used in sea vessels. The enamel is characterized by outstanding physical and mechanical properties, anticorrosion properties and technological properties. It is recommended for use in sea vessels as a coating for surfaces which are subjected to heating up to the temperature of 600°С.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"AVTOVAZ" OJSC

According to the tests dated March 25, 1999 conducted by the "AVTOVAZ" OJSC (Open Joint Stock Company), city of Tolyatti, the Elcon organosilicone enamel corresponds to the requirements set for coatings in accordance with the normative and technical documentation and it is recommended for use with the 610.008.431 machine and painting of exhaust system elements.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"MAP" OJSC

According to the tests dated January 1, 1999 conducted by the "Minsk Automobile Plant" OJSC the Elcon organosilicone enamel corresponds to the requirements set for coatings and it is recommended for painting of exhaust system elements.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"PBF" OJSC

According to the tests # 115 dated December 16, 1999 conducted by the "Pavlovo Bus Factory" OJSC the Elcon organosilicone enamel is recommended for painting of exhaust system elements.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"Izhmash-Auto" SOJSC

According to the tests dated January 14, 1999 conducted by the "Izhmash-Auto" SOJSC (Subsidiary Open Joint Stock Company) the Elcon organosilicone enamel is recommended for painting of exhaust system elements.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"Izhmash-Moto" SOJSC

According to the tests dated March 18, 1999 conducted by the "Izhmash-Moto" SOJSC the Elcon organosilicone enamel is recommended for painting of exhaust system of motorbikes.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

"ELARA" OJSC

According to the tests dated April 28, 1999 conducted by the "ELARA" OJSC (Open Joint Stock Company) the Elcon enamel coating withstands during 96 hours in a salt-spray chamber.

Tel.: +7 (495) 565-38-27

E-mail: mail@elcon.ru

Elcon

NIIMOSSTROY

"CNIIMF" CJSC

"AVTOVAZ" OJSC

"MAP" OJSC

"PBF" OJSC

"Izhmash-Auto" SOJSC

"Izhmash-Moto" SOJSC

"ELARA" OJSC

About the company

Elcon LLC (Limited Liability Company) was founded in 1998. Today the company is one of the leading developers and manufacturers of special-purpose paint-and-lacquer materials. One of the priority fields for the company is fabrication of heat and corrosion resistant enamels.

The best Russian and imported raw materials are used to fabricate products offered by Elcon LLC.

The Company's quality management system is certified and comply with ISO 9001:2008 international standards.

Our clients include

The largest enterprises of the fuel-and-power sector

  • "MOEK" PJSC
  • "MOESK" PJSC
  • "NOVATEK" OJSC
  • "GAZPROM NEFT" PJSC

Manufacturers of furnace equipment

  • "Krasnoarskenergokomplekt" regional production complex LLC,
    boilers of the "Zota" trademark
  • "Yermak-Thermo" LLC,
    furnaces of the "Yermak" trademark
  • "UZPO" LLC,
    furnaces of the "Zharstal" trademark
  • "Technotrade" trading house LLC,
    furnaces of the "Greivari" trademark

Dou you still have questions?

Hello, my name is Alexander and I’m your personal manager.
I will answer all your questions and help you make the right product choice.

All fields are mandatory!